Superhydrophobic and superoleophilic polydimethylsiloxane-coated cotton for oil-water separation process: An evidence of the relationship between its loading capacity and oil absorption ability.

Abstract Developing functional porous materials with highly efficient oil–water separation ability are of great importance due to the global scale of severe water pollution arising from oil spillage and chemical leakage. A solution immersion process was used to fabricate polydimethylsiloxane (PDMS)-coated cotton, which exhibited superhydrophobic and superoleophilic properties. The water contact angle of ∼157° and mass of ∼1.49 g were retained after 1000 compression cycles, indicating that the PDMS was strongly attached to the cotton fibres. The PDMS-coated cotton absorbed various oils and organic solvents with high selectivity, high absorption capacity (up to 7080 wt.%), and good recyclability (exceeding 500 cycles). Notably, the loading capacity of the PDMS-coated cotton against water exhibited a similar trend to its oil absorption capacity. These findings will further the application of superhydrophobic and superoleophilic porous materials in oil/water separation.