Relationship of particle density and organic content in sieve fractions of road-deposited sediments from varying traffic sites based on a novel data set.

Abstract Pollutants (e.g. heavy metals) are to a large extent bound to particles in runoff from traffic areas. Sedimentation is the prevailing process of treatment in most cases. The effectiveness of treatment depends largely on the characteristics of the particles, especially their size and density. Road-deposited sediments (RDS) are the main source of solids in runoff. The sizes and density vary over a wide range, as the particles are composed of mineral and organic components of different origin (e.g. tire and road wear, plant debris, erosion from surrounding areas, atmospheric deposition). While many previous studies have dealt with particle-size distributions, there are still relatively few studies on density. The aim of this study was to investigate the relationship between particle size, organic content and density in RDS on a large data set from different sites and the influence of site-specific conditions on the composition. In addition, it should be checked whether the loss on ignition (LOI) is suitable as a surrogate parameter for density. Density was obtained by gas pycnometry, LOI by ignition in a muffle furnace at 550 °C. In total, 85 RDS samples were collected at 11 sites over a 5 year period and sieved into ten sieve fractions