Buckling resistance of steel H-section beam–columns: In-plane buckling resistance
2019
Abstract Buckling resistance predictions resulting from flexural and flexural–torsional buckling of double tee section members subjected to compression and bending are considered. A novel analytical model is developed for establishing design criteria based on decomposition of the member buckling behaviour into in-plane and out-of-plane resistance. The former is based on second-order bending relationships of load effects of structural members with in-plane equivalent imperfections, while the latter is based on the stability theory of thin-walled open sections. First part of this study presents an analytical formulation of the in-plane buckling resistance of beam–columns. In this regard, further decomposition is postulated for the in-plane first-order bending moment diagram that results in the loading state to be the superposition of two components. The first component is related to symmetrical loading and the second to antisymmetric loading. To consider the second-order effects, prebuckling displacements generated by the abovementioned loading components are amplified with regard to the inversion of the residuum of the buckling force utilisation ratio in order to obtain approximate values of second-order displacements and internal moments. As a result, the in-plane interaction curve, expressed in dimensionless coordinates, that describes the beam–column in-plane flexural buckling resistance without considering lateral–torsional buckling effects, is obtained. The results of nonlinear finite element simulations are used for the verification of the developed analytical formulation. It is concluded that this proposal yields less conservative predictions than those based on the interaction relationships of clause 6.3.3 of Eurocode 3, Part 1–1.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
41
References
7
Citations
NaN
KQI