Additively Manufactured Polyetheretherketone (PEEK) with Carbon Nanostructure Reinforcement for Biomedical Structural Applications

The study is focused on carbon nanostructure (CNS), including both carbon nanotubes (CNTs) and graphene nanoplatelets (GNP), reinforcement of medical‐grade polyetheretherketone (PEEK) and in‐vitro bioactivity for biomedical structural applications. CNS/PEEK scaffolds and bulk specimens, realized via fused filament fabrication (FFF) additive manufacturing are assessed primarily in the low‐strain linear‐elastic mechanical regime. 3D printed PEEK nanocomposites are found to have enhanced mechanical properties in all cases while maintaining the desired degree of crystallinity in the range of 30‐33%. A synergetic effect of the CNS and sulfonation towards bioactivity is observed– apatite growth in simulated body fluid increased by 57 and 77%, for CNT and GNP reinforcement, respectively, doubling the effect of sulfonation and exhibiting a fully‐grown mushroom‐like apatite morphology. Further, CNT‐ and GNP‐reinforced sulfonated PEEK recovers much of the mechanical losses in modulus and strength due to sulfonation, in one case (GNP reinforcement) increasing the yield and ultimate strengths beyond the (non‐sulfonated) printed PEEK. Additive manufacturing of PEEK with CNS reinforcement demonstrated here opens up many design opportunities for structural and biomedical applications, including personalized bioactivated surfaces for bone scaffolds, with further potential arising from the electrically‐conductive nanoengineered PEEK material towards smart and multifunctional structures.