A Biomechanical Study of an Alternative Internal Fixation Method for Transverse Patella Fractures

Pain and reoperation after fixation using tension band wiring and K-wires is not uncommon. A novel hook plate was designed to improve the treatment of patella fractures. The aim of this study was to compare the stability of the hook plate with that of tension band wiring and K-wires in a simulated patellar transverse fracture model (AO/OTA classification 34-C1.1). The authors tested 16 embalmed cadaver knee joints fixed with the hook plate and tension band wiring and K-wires under cyclic loading. Specimens underwent 100 cycles extending the knee joint from 90 degrees of flexion to full extension at a velocity of 50 mm/min. The fracture gap was measured after the initial and last cycles. Data were assessed statistically using the t test, with significance set as P