Fire Performance of Intumescent Waterborne Coatings with Encapsulated APP for Wood Constructions

In this work, intumescent coatings were prepared for protection of wood from fire. The fire-retardant chemical ammonium polyphosphate (APP) is known to have poor resistance to water and high humidity as it is hygroscopic in nature. To improve the water resistance, durability and fire resistance of the intumescent coating, APP was modified using a hybrid organic-inorganic polysiloxane encapsulation shell prepared by the sol–gel method. The physical and chemical properties of the intumescent mix containing microencapsulated ammonium polyphosphate (EAPP) particles were characterized by X-ray fluorescence (XRF), Fourier transform infrared spectroscopy (FTIR), water absorption, dynamic vapor sorption (DVS) and thermogravimetric analysis (TGA). The EAPP mix showed 50% reduction in water absorption, 75% reduction in water vapor sorption and increased thermal stability when compared to the APP mix. The intumescent coatings were applied on wood samples, and their fire performance was evaluated using a cone calorimeter test. The intumescent coatings containing EAPP mix showed better fire retarding properties with longer time to ignition, lower heat release rate and shorter heat release peak when compared to the coating without EAPP mix. The prepared intumescent coating shows higher resistance to water and moisture, and it has great potential to be used in bio-based construction industry for enhancing the fire resistance of wood.