Application of new series connection scheme of vortex tubes in seawater desalination unit using new vortex generators

In this work, an experimental study on new series connection of two Ranque-Hilsch vortex tubes with new vortex generator materials, potential in seawater desalination was implemented, this combined modification has not been studied in open literature. Polycarbonate and Polyamide-Nylon 6 were tested and compared as new vortex generator materials that enhance the heat transfer between the two air streams inside the vortex tube. Moreover, using new seawater preheater by utilizing the waste heat in the exit air stream from the last vortex tube in the arrangement. The results revealed that the hot fraction of both arrangements should be kept at 0.5 for optimum vortex tubes series connection performance. Moreover, the modified series arrangement with Polycarbonate generator had higher evaporator main hot temperature and lower condenser main cold temperature than that of the modified series arrangement with Polyamide-Nylon 6 generator. Furthermore, the desalinated water percentage of Polycarbonate generator connection and Polyamide-Nylon 6 generator connection were reached about 94% and 89%, respectively. Therefore, the modified series hot connection of Ranque-Hilsch vortex tubes with Polycarbonate based vortex generator is recommended for use in seawater desalination applications.