Power earth auger modification for waste extraction from pit latrines
2014
The extraction auger was developed to meet the need for a low cost, effective method to empty pit latrines in difficult to access locations. The basic design consists of a motor that rotates an auger inside a pipe, lifting waste from a pit and depositing it into containers through a wye fitting at the top of the device. Laboratory testing of the auger showed increases in flow rates with increasing auger rotational speed and waste viscosity. An auger with an external hydraulic drive was capable of lifting dairy waste over 2.5 m, at flow rates of over 125 liters per minute. Field-testing showed the equipment was effective at lifting medium viscosity wastes containing a mixture of liquid and solid material. However, the auger was not effective in removing low viscosity, liquid waste that would flow backward down the auger reducing lifting efficiency. The auger was capable of drilling into dense solid waste, forming a ‘posthole’ in the waste. However, since the dense solid waste would not flow towards the auger intake, actual waste removal from the pit was limited. Improved methods are needed to mix liquid and solid waste in pits prior to removal with the extraction auger or other technologies.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
7
References
9
Citations
NaN
KQI