Synthesis and characterization of thin film electroluminescent devices all-prepared by ultrasonic spray pyrolysis
2013
Abstract Alternating current thin film electroluminescent devices have been fabricated using aluminum-doped zinc oxide (ZnO:Al) as transparent conducting layer, aluminum oxide (Al 2 O 3 ) as insulating layers, and manganese-doped zinc sulfide (ZnS:Mn) as electroluminescent layer. All these films were deposited by the ultrasonic spray pyrolysis technique at the same temperature (450°) on glass substrates, forming a standard MISIM (metal–insulator–semiconductor–insulator–metal) configuration. The electroluminescence of MISIM devices with a total thickness of ~ 1330 nm was investigated by applying a sinusoidal voltage with a frequency of 10 kHz. The devices showed orange-emission spectra centered at approximately 570 nm, characteristic of 4 T 1 → 6 A 1 radiative transitions of Mn 2 + ions in the ZnS host, with a sharp intensity increase upon increasing the root mean square voltage above a threshold of 25 V and a rapid saturation for voltages higher than 38 V. The electroluminescent emission of these MISIM structures can be observed with the naked eye under ambient illumination.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
32
References
3
Citations
NaN
KQI