Effect of aluminum and aluminum/nickel hybrid fillers on the properties of epoxy composites
2016
The influence of the concentration of aluminum (Al) and aluminum/nickel (Al/Ni) hybrid fillers on the mechanical and electrical properties of the prepared Al/epoxy and Al/Ni/epoxy composites were studied. The results showed that sample containing 20 wt% Al has the highest compressive strength value whereas the maximum conductivity was observed at 30 wt% Al. By replacing Al by different ratios of Ni in Al/epoxy composites the samples showed a little decrease in conductivity and tensile strength values but an increase in the hardness. The composites were also studied by positron annihilation lifetime spectroscopy. The ortho-positronium lifetime (τ3) results showed that 30 wt% Al and 40/10 wt% Al/Ni are the critical concentrations for Al/epoxy and Al/Ni/epoxy composites respectively. The correlation between positron annihilation lifetime parameters, electrical and mechanical properties was also discussed. A negative correlation was obtained between nanoscale free-volume parameters and mechanical properties f...
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
34
References
6
Citations
NaN
KQI