Laser generated proton beam focusing and high temperature isochoric heating of solid matter

The results of laser-driven proton beam focusing and heating with a high energy (170J) short pulse are reported. Thin hemispherical aluminum shells are illuminated with the Gekko petawatt laser using 1μm light at intensities of ∼3×1018W∕cm2 and measured heating of thin Al slabs. The heating pattern is inferred by imaging visible and extreme-ultraviolet light Planckian emission from the rear surface. When Al slabs 100μm thick were placed at distances spanning the proton focus beam waist, the highest temperatures were produced at 0.94× the hemisphere radius beyond the equatorial plane. Isochoric heating temperatures reached 81eV in 15μm thick foils. The heating with a three-dimensional Monte Carlo model of proton transport with self-consistent heating and proton stopping in hot plasma was modeled.