Production, characterization and properties of chloridized mesoporous activated carbon from waste tyres

In this study, chloridized mesoporous activated carbons (ClMAC) were prepared from used tyres. Their pore structure, surface chemistry and adsorptive capacities of toluene were investigated with nitrogen gas adsorption, Fourier transform infrared spectroscopy (FT-IR) and bench adsorptive experiments. A series of activated carbons were produced by pyrolysis, activation and chlorination under different temperatures. The activated carbons derived from scrap tyres had highly mesoporous volumes and surface areas, for example, the ClMAC prepared under 300 °C was 0.81 cm3 g—1, and 1078.2 m2 g —1, respectively. (Commercial activated carbon—F-400 was 0.16 cm3 g—1, and 1021.1 m 2 g—1). The adsorptive capacities of toluene in the activated carbon-derived waste tyres were compared with the F-400 and the experimental results showed chlorinated activated carbons had exceptional characteristics for toluene adsorption in an aqueous solution; especially, the ClMAC produced in 300 °C had a 471.8 mg g—1 maximum capacity; ho...