Impacts of surface or interface chemistry of ZnSe passivation layer on the performance of CdS/CdSe quantum dot sensitized solar cells

Abstract ZnSe deposited via successive ionic layer adsorption and reaction (SILAR) method onto TiO 2 /CdS/CdSe photoanode has been proven as an effective passivation layer to suppressing charge recombination and enhancing power conversion efficiency in quantum dot-sensitized solar cells (QDSCs). However, the device performance varies appreciably with the deposition process as the chemical identity and the interfacial structure between the passivation layer and the quantum dots and electrolytes have retained quite some unanswered questions. The present paper reports the significant impacts of ZnSe passivation layer with different surface or interface chemistry on the performance of CdS/CdSe QDSCs. The photovoltaic properties show that the performance of assembled cells has a strong dependence on the SILAR immersion sequences started with Zn 2+ or Se 2- . When Zn 2+ was initially deposited, the unintentionally formed QDs/ZnSe/Se/SeO 2 structure with a large amount of ZnSe leads to a significant increase in the photovoltaic properties. When Se 2- was first deposited, most of the Se 2- absorbed on the surface of the photoanode would be oxidized to form Se° and SeO 2 , with a small fraction of ZnSe formed. The resulted QDs/Se/SeO 2 /ZnSe structure leads to a drastic decrease of the solar cell performance.