LBNE lattice & optics for proton extraction at MI-10 and transport to a target above grade

For the Long Baseline Neutrino Experiment (LBNE) at Fermilab 120 GeV/c protons will be transported from the Main Injector (MI) to an on-site production target. The lattice design and optics discussed here has the beam extracted vertically upwards from MI-10 and the keeps the majority of the line at an elevation above the glacial till/rock interface and terminates on a target at 10 ft above grade. The LBNE beamline discussed here is a modular optics design comprised of 3 distinct lattice configurations, including the specialized MI {yields} LBNE matching section and Final Focus. The remainder of the line is defined by six FODO cells, in which the length and phase advance are chosen specifically such that beam size does not exceed that of the MI while also making the most efficient use of space for achromatic insertions. Dispersion generated by variations in the beam trajectory are corrected locally and can not bleed out to corrupt the optics elsewhere in the line. Aperture studies indicate that the line should be able to transport the worst quality beam that the Main Injector might provide. New IDS dipole correctors located at every focusing center provide high-quality orbit control and further ensure that LBNEmore » meets the stringent requirements for environmental protection.« less