A826. PREDICTING BONE INGROWTH AND TISSUE DIFFERENTIATION AROUND A LONG STEMMED POROUS COATED HIP IMPLANT USING FRACTURE HEALING PRINCIPLES
2011
Uncemented hip implants commonly have porous coated surfaces that enhance the mechanical interlock with bone, encourage bone ingrowth and promote the formation of a stable interface between prosthesis and bone. However, the presence of tissue, either fibrous or with parts of osseous tissue, at the interface between the implant and the bone has been commonly observed after a few years in vivo. The exact mechanisms that govern the type of tissues formed at the interface are not fully understood and several theories have been proposed. This study aims to employ finite element analysis (FEA) to simulate tissue formation and differentiation around the AML (DePuy, Warsaw, USA) femoral implant by employing a tissue differentiation algorithm based on a mechanoregulatory hypothesis of fracture healing. FE models of the femur were generated using computer tomography (CT) scans. The AML prosthesis was then implanted into the bone and a granulation tissue layer of 0.75mm was created around the implant. The mechanoregulatory hypothesis of Carter et al (J.Orthop, 1988) originally developed to explain fracture healing was used with selected modifications, most notably the addition of a quantitative module to the otherwise qualitative algorithm. The tendency of ossification in the original hypothesis was modified to simulate tissue differentiation to bone, cartilage or fibrous tissue. Normal walking and stair climbing loads were used for a specified number of cycles reflecting typical patient activity post surgery. The transformation of granulation tissue to one of the three simulated tissue types was evident as the iterations progressed. The majority of the tissue type formed initially was cartilage and bone (~40% each), and occupied the mid to distal regions of the implant respectively. After tissue stabilisation, the prominent tissue type was bone (65%), occupying most of the mid-distal regions with a significant decline in cartilage tissue formed. This has been shown in clinical retrieval studies with the same implant, where maximum bone ingrowth is in the mid-distal regions of the implant, directly corresponding to the region where there is minimal micromotion. This would be the case with a diaphyseal fixation, which most AML prostheses employ for stability. Fibrous tissue formation was limited to the proximal-medial regions (~10%), with the remainder of the proximal regions filled with cartilage tissue. In addition, predicted bone formation was along the lines of the more stable cartilage tissue as opposed to directly replacing fibrous tissue. The formation of bone would require repeated periods of minimal micromotion and stress at the interface tissue; this was facilitated by the presence of cartilage tissue around the mid regions of the implant. The micromotion and interface stresses in the proximal regions of the implant were too high to encourage bone ingrowth, resulting in the presence of tissue that remained fibrous throughout the process. The FE model, employing a very simple tissue differentiation hypothesis and algorithm was able to predict the formation of different tissues at the interface. Initial bone formation was rapid, occupying the distal regions of the implant, and then gradually occupying a larger portion of the mid-regions around the implant. The proximal regions were largely occupied by a combination of fibrous and cartilage tissue. Overall, the presence of bone and cartilage tissue accounted for nearly 85% of the tissue formed which would suggest a very stable interface as predicted by the Carter’s hypothesis.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI