Reaction of palladium thin films with an Si-rich 6H-SiC(0001)(3×3) surface

Abstract The reaction of Pd thin films evaporated in ultrahigh vacuum on a clean and Si-rich 6H-SiC(0001)(3×3) surface has been investigated in situ by low-energy electron diffraction (LEED) and photoelectron spectroscopy (UPS and XPS), and ex situ by atomic force microscopy (AFM) and glancing-incidence X-ray diffraction (GIXRD). For studying the interface formation, submonolayer amounts of Pd were sequentially deposited up to ∼20 A on the substrate maintained at room temperature. This deposit was subsequently annealed to 600–800 °C. At room temperature, Pd starts to react with SiC when the thickness attains ∼2.5 A, giving an interface Pd 2 Si silicide. Under annealing the film is transformed into Pd 2 Si islands standing on the SiC (1×1) surface. No extra-structure of C 1s is observed in the two cases; only an energy shift of about 0.25 eV is detected during the metal deposition, which is attributed to a change in the band bending. Further deposition of ∼100 A of Pd on this annealed surface gives an epitaxial Pd(111) film, despite a lattice mismatch of more than 10% between the metal and the semiconductor. The film is disrupted after annealing at 600–800 °C. The combination of XPS, AFM and GIXRD analyses indicates that the film annealed at 800 °C is discontinuous and formed of sharp epitaxial Pd 2 Si islands and graphite which probably surrounds the islands.