A Quasi-Yagi Antenna Backed by a Jerusalem Cross Frequency Selective Surface

A quasi-Yagi antenna is developed to operate at 2.4 GHz (ISM band) presenting a low profile and off-axis radiation when packaged over a metal ground plane. The off-axis radiation is realized by incorporating a Jerusalem cross frequency selective surface (JC-FSS) as the ground plane for the antenna. A JC-FSS is preferred because of its frequency stability in the operating band for a large angular spectrum (≈70°) of TE- and TM-polarized incident waves. In this research, the substrate of the antenna flush-mounted on top of the FSS is added to the JC-FSS model and allows for a smaller cell grid. The prepared quasi-Yagi antenna over the JC-FSS offered 260 MHz of functional bandwidth and 54° of beam tilt towards the end-fire direction. To the best of the authors’ knowledge this is the first instance that these two structures are combined for off-axis radiation. Additionally, to support the preferred use of the JC-FSS, the quasi-Yagi is backed by a square patch (SP) FSS for comparison purposes.