Effects of Na2O/SiO2 molar ratio on properties of aggregate-paste interphase in fly ash-based geopolymer mixtures through multiscale measurements

Abstract This paper presents a multiscale experimental study on the influence of different Na 2 O/SiO 2 molar ratios on the mechanical and microstructural characteristics of the aggregate-paste interphase in fly ash-based geopolymer mixtures. By analyzing the scanning electron microscope images, the solid phases present in the microstructure were identified, and the frequency of occurrence of each phase was quantified. In addition, the porosity and pore size distribution of geopolymer specimens were measured by mercury intrusion porosimetry. By conducting nanoindentation tests on a large array of indentations and subsequent statistical analysis of the test results, the elastic moduli of individual phases were extracted. The bond behavior between aggregate and paste was also investigated by conducting the three-point bending test of single edge notched beam specimens. Integration of test results in different length scales showed that interphase region generates more sodium aluminosilicate hydrate (i.e., N-A-S-H) gel than the adjacent paste region regardless of the Na 2 O/SiO 2 ratios used in this study. In addition, the mixture prepared with the higher Na 2 O/SiO 2 molar ratio exhibited more N-A-S-H gel in the interphase zone, which led to increased bonding strength between aggregate and paste.