Damage tolerance of an architected adhesive joint
2018
Abstract Butt joints have been manufactured from aluminium alloy substrates of interlocking square-wave architecture and silyl-modified polymer (SMP) adhesive. The macroscopic traction versus opening separation responses of the butt joints have been measured for selected values of square-wave amplitude and thickness of adhesive layer. Insight into the failure mechanisms of the square-wave joint is obtained by performing tensile tests on planar butt joints and by performing double-lap shear tests on planar joints. The mechanisms of adhesive failure in a planar butt joint are determined by micro X-ray computed tomography. It is determined by optical fractography that the failure mechanisms in the square-wave joint are a combination of those observed in the butt and double-lap shear joints, and consequently a simple model for the strength and toughness of the square-wave joint is developed. A design map is constructed for the strength, toughness and damage-tolerance of the square-wave micro-architecture in order to generate the optimal topology for a given application.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
27
References
15
Citations
NaN
KQI