Multiple equilibria describe the complete adsorption isotherms of nonporous, microporous, and mesoporous adsorbents
2021
Abstract The adsorption of simple gasses begins with the formation of a monolayer on the pristine surface, not always followed by the formation of a second or more monolayers. Subsequently, cluster formation or cavity filling occurs, depending on the properties of the surface. The characteristically different shape of the isotherms related to these processes allows to clearly differentiate them. We analyzed argon and N2 adsorption isotherms quantitatively over the entire relative pressure range for adsorbents bearing different properties: the nonporous Stober-type particles, the microporous zeolite L (ZL) and zeolite L filled with indigo (Indigo-ZL), and three mesoporous silica adsorbents of different pore size. The formal equilibria involved in cluster formation and in cavity filling have been derived and successfully applied to quantitatively describe the isotherms of the adsorbents. No indication regarding formation of a second monolayer on top of the first one was observed for the Stober-type particles. Instead, cluster generation, which minimizes surface tension, starts early. The behavior of microporous ZL and of Indigo-ZL is different. A second monolayer sets up and cluster formation starts with some delay. The enthalpy of cluster formation is, however, practically identical with that seen for the Stober-type particles. The difference between the experimental and the calculated inflection points is very small. The shapes of the isotherms seen for the mesoporous adsorbents differ significantly from those seen for the nonporous and for the microporous adsorbents. The quantitative analysis of the data proves that formation of a second monolayer is followed by filling of cavities which ends as soon as all cavity sites are filled. The sum of the individual fractional contributions, namely the monolayer formation ΘmL, the appearance of a second monolayer Θ2L on top of the first one, and the cavity filling Θ cav , yields a calculated adsorption isotherm Θcalc which describes the experimental data Θexp well. The experimental and the calculated first inflection points are in excellent agreement, which is also the case for the second inflection points. The value of the cavity filling enthalpy is roughly 10% larger than that for the cluster formation seen in the nonporous and the microporous adsorbents. The volume for cavity filling is significantly smaller than the monolayer volume for the mesoporous adsorbent with a pore diameter of 2.7 nm, while it is the same or larger for pore diameters of 4.1 nm and 4.4 nm, respectively. We conclude that understanding the adsorption isotherms as signature of several sequential chemical equilibrium steps provides additional information data for clusters, cavities, and position of the inflection points, not accessible by means of the conventional models. The theory reported herein covers type I, II, IV and to some extent also type VI isotherms.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
42
References
0
Citations
NaN
KQI