Production of functionally graded SiC/Al-Cu-Mg composite by centrifugal casting
2016
In this study, production of functionally graded AlB2 reinforced Al-4%Mg composite has been investigated. In-situ high-aspect-ratio flake AlB2 reinforcement was obtained by the addition of boron oxide to the liquid Al-Mg at 1400 °C. It has been observed that there were two distinct regions without a smooth grading: one is rich of and the other is poor of AlB2. The results showed that the highest AlB2 content has been found to be around 10% in external zones, whereas the lowest AlB2 content has been observed to be 0.02% in the internal zones. Additionally, results showed that, depending on the increase in the reinforcement phase in external zones, up to 20 % increase in the hardness of the composite has been achieved.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
14
References
15
Citations
NaN
KQI