Using the Lamina Nutrient Foramen as the Entry Point for Posterior Cervical Pedicle Screw Placement

Abstract Study design A prospective study and technique description. Objective This study introduced a method for posterior cervical pedicle screw placement by using the bilateral posterior lamina nutrient foramens as the entry point. Methods Firstly, 30 dry C3-C7 vertebrae specimens were harvested for measurement. The lamina nutrient foramens were used as the entry points for posterior cervical pedicle screw placement and four linear and two angle parameters were obtained from a computed tomography scan(CT). Then, 60 patients who underwent C3–C7 pedicle screw fixation using this method were included, linear and angle parameters were obtained from a postoperative CT. Results The average incidences of lamina nutrient foramen on the C3–C7 specimens were 88.3%, 90.0%, 95.0%, 95.0%, and 96.7%, respectively. The distances from the entry point to the pedicle screw tip (OD), the pedicle transverse angles (α), and the pedicle sagittal angles (β) measure for the entry points from C3–C7 were 28.74 ± 3.45–30.15 ± 2.01 mm, 26.88 ± 6.89° to 32.72 ± 5.91°, and 12.48 ± 9.31° to 19.71 ± 8.45°, respectively, with no significant differences between the left and right sides. In the 60 patients who underwent surgery, the lengths of the pedicle screws (PL) were 28.34 ± 2.25–30.15 ± 2.31 mm, the pedicle transverse angles (α) were 26.89 ± 6.86° to 32.36 ± 5.65°, and the pedicle sagittal angles (β) were 12.49 ± 9.11° to 20.06 ± 8.91°. The new method had a 96.8% (454/469) success rate among these patients, with no screws penetrating the spinal canal or signs of vertebral artery injury. Conclusion Entry at the bilateral lamina nutrient foramen represents an alternative posterior cervical pedicle screw placement technique that is feasible and safe.