THE FINITE ELEMENT MODELLING OF GLULAM TROPICAL TIMBER BEAM IN BENDING
2016
A full scale bending testing of glued laminated (glulam) timber beam can be costly and time consuming. Therefore, computer modeling is an economical and an efficient tool to achieve the result within the acceptable accuracy. Among other modeling techniques, the finite element modeling (FEM) is widely used for its reliability to simulate and to verify the behaviour of structural elements exactly in the same way the elements perform in the experimental test. Further results of different structural element dimensions or materials can be predicted by modifying the input parameters that are of interest to the study. This study presents the verification of FEM with experimental bending test results on simply supported glulam timber beams made of Keruing and Resak species. The two dimensional (2D) FEM with LUSAS 14.3 software was used. The verification showed an acceptable agreement between the FEM and the experimental results.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
10
References
0
Citations
NaN
KQI