Improvement of Polymer Grade L-Lactic Acid Production Using Lactobacillus rhamnosus SCJ9 from Low-Grade Cassava Chips by Simultaneous Saccharification and Fermentation

The present study aims to examine the process for L-lactic acid production from low-grade cassava chips (LGC) using a two-step fermentation approach (TSF) and simultaneous saccharification and fermentation (SSF) by proficient, newly isolated Lactobacillus rhamnosus strain SCJ9. The optimized medium composition revealed by response surface methodology for TSF was 166 g/L LGC hydrolysate and 20 g/L yeast extract (YE), while other medium components were fixed (g/L) as follows: tween80 (2.0), (NH4)2HPO4 (2.0), CH3COONa∙3H2O (6.0), (NH4)2HC6H5O7 (2.0), MgSO4∙7H2O (0.5), and MnSO4∙H2O (0.3). Based on the optimization conditions, the maximum experimental L-lactic acid of 134.6 g/L was achieved at 60 h fermentation time with a production efficiency of 89.73%, 0.95 g/g yield and 2.24 g/L/h productivity. In contrast, L-lactic acid production by SSF under optimized concentrations of thermostable-α-amylase (AA) and glucoamylase (GA) gave maximum L-lactic acid of 125.79 g/L at only 36 h fermentation time which calculated to the production efficiency, yield and productivity of 83.86%, 0.93 g/g and 3.49 g/L/h, respectively. The L-lactic acid production obtained from SSF was significantly improved when compared to TSF based on lower enzyme loading usage, shorter hydrolysis time and increase in production efficiency and productivity. Furthermore, there were no significant differences in the production by SSF between experiments conducted in laboratory bottle and 10-L fermenter. The results indicated the success of up-scaling for L-lactic acid production by SSF which could be developed for a further pilot-scale production of L-lactic acid.