Impact of film thickness on optical properties and optoelectrical parameters of novel CuGaGeSe 4 thin films synthesized by electron beam deposition
2020
The authors in this article present the synthesis of good quality CuGaGeSe4 thin films of different thicknesses using electron beam deposition on well pre-cleaned glass substrates. X-ray diffraction patterns displayed the amorphous nature of as-prepared CuGaGeSe4 thin films. In addition, the elemental compositional analysis of these films was examined by the energy-dispersive X-ray spectroscopy technique, which showed that there is good matching between the selected and detected percentages. Transmittance and reflectance spectra of these CuGaGeSe4 samples were measured to experimentally determine the absorption coefficient and some related optical parameters. Optical band-gap energy values of samples were determined via Tauc’s Plots; they are arisen owing to the indirect allowed transition. They are decreased from 1.43 to 1.29 eV by increasing the film thickness from 250 to 445 nm. The skin depth, absorption index, and refractive index of CuGaGeSe4 thin films were also obtained and extensively studied. As well as, some optoelectrical parameters of these investigated films were discussed, like optical resistivity, optical mobility, optical conductivity, the lattice dielectric constant, and the ratio of the charge carrier concentrations to the effective mass (Nopt/m*). Along with, some nonlinear optical parameters of CuGaGeSe4 films were studied employing Miller’s formulas. The values of the dispersion energy, static refractive index, the static dielectric constant, the oscillator strength and others increase, while the oscillator energy and the relaxation time decrease as the film thickness increased. The obtained results showed that these CuGaGeSe4 film samples can be successfully used as absorption layers in thin-film solar cells.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
62
References
9
Citations
NaN
KQI