Misfit dislocations between boron-doped homoepitaxial films and diamond substrates studied by X-ray diffraction topography
2018
Boron-doped diamond epilayers grown over diamond substrates have a different lattice parameter from the undoped diamond substrate, which introduces a lattice mismatch between substrates and epilayers. This can generate misfit dislocations at the interface when the epilayer reaches a certain critical thickness. For a boron concentration of about 1 × 1020 atoms cm−3, the calculated lattice mismatch is about 1.3 × 10−4 and the critical thickness is of the order of 0.2 µm. In the epilayers studied, grown over high-pressure high-temperature 1b (001) substrates, the lattice mismatch and the epilayer thickness are 1.3 × 10−4, 30 µm and 6.5 × 10−4, 4 µm. The epitaxial strain has been relaxed by the generation of two orthogonal misfit dislocation systems. These are edge dislocations parallel to the [100] and [010] directions with a Burgers vector making an angle of 45° with the (001) interface. Their lengths are 40–60 µm and their lineal densities 200–240 cm−1. They are heterogeneously nucleated, propagated in the form of half-loops along the slip planes (011) and (101), respectively, and related mainly to 〈111〉 threading dislocations emerging from octahedral growth sectors. Another kind of half-loop originates from the substrate growth sector boundaries. Limited X-ray topography has been demonstrated to be a very useful tool to discriminate between substrate and epilayer defects when their lattice mismatch is not sufficient to separate such defects in conventional Lang topography. X-ray section topography has confirmed the presence of [001] dislocations in the epilayers and the misfit half-loops related to threading dislocations propagating from the interface.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
28
References
1
Citations
NaN
KQI