Evaluation of Three-Beam and Four-Beam Profiler Wind Measurement Techniques Using a Five-Beam Wind Profiler and Collocated Meteorological Tower

Abstract In this paper a five-beam wind profiler and a collocated meteorological tower are used to estimate the accuracy of four-beam and three-beam wind profiler techniques in measuring horizontal components of the wind. In the traditional three-beam technique, the horizontal components of wind are derived from two orthogonal oblique beams and the vertical beam. In the less used four-beam method, the horizontal winds are found from the radial velocities measured with two orthogonal sets of opposing coplanar beams. In this paper the observations derived from the two wind profiler techniques are compared with the tower measurements using data averaged over 30 min. Results show that, while the winds measured using both methods are in overall agreement with the tower measurements, some of the horizontal components of the three-beam-derived winds are clearly spurious when compared with the tower-measured winds or the winds derived from the four oblique beams. These outliers are partially responsible for a lar...