Slope stability analysis in 3D using numerical limit analysis (NLA) and elasto-plastic analysis (EPA)

ABSTRACTThe present paper addresses the problem of factor of safety (FS) determination in 3D slope stability analysis. For that purpose, use is made of two numerical methods/techniques in three benchmark problems: numerical limit analysis (NLA) and elasto-plastic analysis (EPA). Finite elements are used in both techniques. The primary objective of the study is, by comparing the two techniques, to establish the feasibility of using NLA in the evaluation of 3D slope stability problems and to establish its practical applicability and competitiveness in relation to EPA. Because of their geometry or their boundary conditions, the problems cannot be analysed as plane strain state problems or using the 2D limit equilibrium technique. In both methods, an FS is determined for the slopes by reducing the strength parameters of the geological materials using a scalar factor, known as the strength reduction factor. From the comparison of the FSs and of the computational efforts required for the two numerical technique...