High temperature stability and low adsorption of sub-100 nm magnetite nanoparticles grafted with sulfonated copolymers on Berea sandstone in high salinity brine
2017
Abstract The synthesis of polymer grafted nanoparticles that are stable at high salinities and high temperature with low retention in porous media is of paramount importance for subsurface applications including electromagnetic imaging, enhanced oil recovery and environmental remediation. Herein, we present an improved approach to synthesize and purify sub-100 nm IONPs grafted with a random copolymer poly(AMPS-co-AA) (poly(2-acrylamido-3-methylpropanesulfonate-co-acrylic acid)) by means of catalyzed amide bond formation at room temperature. The improved and uniform polymer grafting of magnetic nanoparticles led to colloidal stability of IONPs at high temperature (120 °C) in API for a month. The transport behavior of the polymer grafted IONPs was investigated in crushed and in consolidated Berea sandstone. The high poly (AMPS-co-AA) polymer level on the surface (∼34%) provided electrosteric stabilization between the NPs and weak interactions of the NPs with anionic silica and sandstone surfaces. This behavior was enabled by low affinity of Ca 2+ towards the highly acidic AMPS monomers thus enabling strong solvation in API brine. In crushed Berea sandstone, the retention was reduced by three fold and nine fold relative to our earlier studies, given the improvements in the grafted polymer layer. For intact core flood experiments in Berea sandstone carried out at elevated temperature (65 °C) and pressure (1000 psi net confining stress), the retention was 519 μg/g, comparable to the value for crushed Berea sandstone. Furthermore, the addition of a relatively small amount (0.1% v/v) of commercially available sacrificial polymer (e.g., HEC-10) further reduced IONP retention to 252 μg/g or 0.17 mg/m 2 by blocking retentive sites.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
57
References
24
Citations
NaN
KQI