The effects and interactions of fabrication parameters on the properties of selective laser sintered hydroxyapatite polyamide composite biomaterials

Purpose – Hydroxyapatite‐polymer composite materials are being researched for the development of low‐load bearing implants because of their bioactive and osteoconductive properties, while avoiding modulus mismatch found in homogenous materials. For the direct production of hydroxyapatite‐polymer composite implants, selective laser sintering (SLS) has been used and various parameters and their effects on the physical properties (micro and macro morphologies) have been investigated. The purpose of this paper is to identify the most influential parameters on the micro and macro pore morphologies of sintered hydroxyapatite‐polymer composites.Design/methodology/approach – A two‐level full factorial experiment was designed to evaluate the effects of the various processing parameters and their effects on the physical properties, including open porosity, average pore width and the percentage of pores which could enable potential bone regeneration and ingrowth of the sintered parts. The density of the sintered par...