Femtosecond optical Kerr effect setup with signal “live view” for measurements in the solid, liquid, and gas phases

We present the experimental setup constructed in our laboratory for measurement of the femtosecond optical Kerr effect. The setup allows measurements with high temporal resolution and acquisition speed. The high signal to noise ratio is obtained with use of a homemade balanced detector. Due to the high acquisition speed and good signal to noise ratio, it is possible to have a “live view” of the signal and to easily tune the sample position and orientation before the measurement. We show the example results obtained in the solid, liquid, and the gas phases and we use them in order to check on the precision of our setup. As the samples we have used a YAG crystal, liquid acetone, and atmospheric air. In the latter two cases, a good agreement with the literature data has been found. The measurements in the gas phase confirm that our setup, although utilizing low energy pulses from the sapphire oscillator, is able to acquire high quality rotational signal in a low density sample.