Catalytic hydrothermal co-gasification of canola meal and low-density polyethylene using mixed metal oxides for hydrogen production

Abstract Canola meal is a low-value agricultural residue obtained after oil extraction from canola, the utilization of which requires further attention. On the other hand, plastic waste disposal is also another leading issue that creates severe environmental challenges. Supercritical water gasification is considered an environmentally friendly technology to produce hydrogen from plastic residues and organic wastes. This study deals with hydrothermal co-gasification of canola meal and plastic wastes (i.e., low-density polyethylene) while exploring the influence of temperature (375–525°C), residence time (15–60 min) and plastic-to-biomass ratio (0:100, 20:80, 50:50, 80:20 and 100:0) on hydrogen yield. Maximum hydrogen yield (8.1 mmol/g) and total gas yield (17.9 mmol/g) were obtained at optimal temperature and residence time of 525°C and 60 min, respectively. A change in the gas yield with variable plastic-to-biomass ratio showed synergistic effects between both feedstocks. The trend of catalytic performance towards improving hydrogen yield was in the following order: WO3–TiO2 (18.5 mmol/g) > KOH (16.9 mmol/g) > TiO2 (9.5 mmol/g) > ZrO2 (7.8 mmol/g) > WO3–ZrO2 (7.4 mmol/g).