The examination of fracturing process subjected to triaxial compression test in Inada granite
2002
The behavior of a granite subject to a triaxial compression test ranging from the prefailure stage to the postfailure stage was studied using a fluorescent technique from the geological point of view. Microscopic observations of the specimens at different stages showed changes in the failure process. The start of formation of new microcracks paralleled the compression direction through their propagation until the onset of faulting and ended with the failure of shear zones after the strength failure point. Pores chiefly identified in the feldspar increased in length and width in the early stages, but not in number. It seems that the effect of pore spaces did not have any effect of failure. The microcracks generated on angular edges of quartz or feldspar grains and around biotite grains with increasing compression force. The phenomenon appearing on the crystal boundaries among biotite and quartz or feldspar agrees with the result calculated based on the theory on stress fields with ellipsoidal inhomogeneity suggested by Eshelby.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
9
References
32
Citations
NaN
KQI