Comparison of Measurement Protocols to Estimate Preferred Walking Speed Between Sites

Abstract Background Walking speed influences a variety of typical outcome measures in gait analysis. Many researchers use a participant’s preferred walking speed (PWS) during gait analysis with a goal of trying to capture how a participant would typically walk. However, the best practices for estimating PWS and the impact of laboratory size and walk distance are still unclear. Research Question Is measured PWS consistent across different distances and between two laboratory sites? Methods Participants walked overground at a “comfortable speed” for six different conditions with either dynamic (4, 6, 10, and 400 m) or static (4 and 10 m) starts and stops at two different data collection sites. Repeated-measures ANOVA with Bonferroni corrections were used to test for differences between conditions and sites. Results Participants walked significantly faster in the 4, 6, and 10 m dynamic conditions than in the 400 m condition. On average, participants walked slower in the static trials than the dynamic trials of the same distance. There was a significant interaction of lab and condition and so results were examined within each lab. Across both labs, we found that the 4 and 10 m dynamic conditions were not different than the 6 m dynamic condition at both sites, while other tests did not provide consistent results at both sites. Significance We recommend researchers use a 6-meter distance with acceleration and deceleration zones to reliably test for PWS across different laboratories. Given some of the differences found between conditions that varied by site, we also emphasize the need to report the test environment and methods used to estimate PWS in all future studies so that the methods can be replicated between studies.