Doppler color flow mapping of the proximal isovelocity surface area: a new method for measuring volume flow rate across a narrowed orifice.

This manuscript describes a new method, validated in in vitro models, for quantitating volume flow rate across an orifice with Doppler color flow mapping. Flow through a narrowed orifice is characterized by the convergence of radial streamlines proximal to the orifice. In this color Doppler method, one or more isovelocity surface areas (PISA), delineated by blue and red aliasing velocity interfaces, can be identified proximal to the narrowed orifice. Volume flow rate (in milliliters per second) can then be calculated as PISA (in square centimeters) multiplied by the isovelocity of the PISA (in centimeters per second). Doppler color flow mapping was performed in in vitro models of constant and pulsatile flow through an orifice in a wall. The first proximal isovelocity surface area, with an isovelocity corresponding to the aliasing velocity, that is, one half the Nyquist sampling limit, could be identified as a blue and red color interface proximal to the orifice. Over a range of circular orifice diameters from 3 mm to 16 mm and flow rates from 0.5 to 18.7 L/min, the proximal isovelocity surface area could be imaged in two planes. This PISA was best described by a hemielliptic mathematical model with two different radii measured from long-axis and short-axis views. In the constant flow model, volume flow rate calculated from the Doppler PISA correlated well with actual volume flow rate measured simultaneously with a cylinder and stopwatch ( r = 0.98, p r = 0.99, p