Dust explosions: How should the influence of humidity be taken into account?

Abstract In this work, the influence of humidity on dust explosions of metallic (aluminium) and organic materials (icing sugar, polyethylene and magnesium stearate) has been studied. The impact of pre-humidification of powders on their ignition sensitivity, their volume resistivity and charge decay time has been assessed. The influence of humidity on explosion severity has also been studied by two methods: on the one hand, the dust sample was stored in a controlled workstation at constant relative humidity; on the other hand, the dry dust was dispersed in a humidity controlled atmosphere in the vessel. As expected, the effect of humidity strongly depends on the chemical nature of the particles. Experiments on powders volume resistivity and charge decay time have shown typical trends but have especially pointed out the inadequacy of some standards. Inhibition phenomena have been verified for polyethylene and magnesium stearate, whereas both inhibition and promotion have been observed for icing sugar and could be explained by an evolution of sucrose structure. Dry aluminium dust explosions in humid atmosphere show that water vapour inerts the explosion. However, when aluminium is stored at controlled humidity, the maximum rise of pressure rate increases with the water content, which is probably due to hydrogen generation.