Method for preparing potassium fluotitanate from titanium alloy chemical milling waste liquid
2012
A method for preparing potassium fluotitanate from titanium alloy chemical milling waste liquid comprises the process steps as follows: taking 30-100 g of titanium alloy chemical milling waste liquid, placing the titanium alloy chemical milling waste liquid in a plastic container, adding 3-14 g of potassium chloride or 2-15 g of potassium nitrate, and fully stirring, so that fluotitanic acid and potassium ions in the titanium alloy chemical milling waste liquid react to generate potassium fluotitanate while a small quantity of potassium fluotitanate is separated out, so as to obtain a standby mixed liquor A; adding anhydrous ethyl alcohol in the mixed liquor A, so that the content of the anhydrous ethyl alcohol is at least 8% of the volume fraction of the total amount of the alloy chemical milling waste liquid, and placing the plastic container in water at 0-15 DEG C for 10-30 minutes, so as to obtain a standby mixed liquor B; and filtering the mixed liquor B, and drying filtered out matters at 80 DEG C to obtain the potassium fluotitanate. According to the method preparing the potassium fluotitanate by taking the titanium alloy chemical milling waste liquid as a raw material, not only the environment protection is facilitated and waste is reutilized, but also the process is simple, cost is reduced, and the purity of the product is high.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI