Method for calculating horizontal drain induced non-linear and large strain degree of consolidation

2021 
Abstract Consolidating dredged clay slurries using a combination of vacuum pressure and prefabricated horizontal drains (PHDs) is widely used in practice. This is a large strain problem, but there is no existing large strain theory for PHD induced consolidation. A method with explicit equations has been proposed to consider both mechanical and geometrical non-linearities in analyzing PHD induced consolidation. The method considers stepwise variation of properties using imaginary time concept. An imaginary time is determined by the condition of continuity of degree of consolidation before and after changing the properties. Then the method was applied to analyze a large scale model test of vacuum consolidation with PHD. Two analyses were conducted. One considered both the mechanical and geometrical non-linearity (large strain), and another only considered mechanical non-linearity (small strain). The results of large strain analysis agree with the measured settlement curve and excess pore pressures well. While the small strain analysis under-estimated the rate of consolidation significantly. The results from this study indicate that for analyzing PHD induced consolidation of clay slurries considering the effect of large strain is important, and the proposed method can be a useful design tool.
    • Correction
    • Source
    • Cite
    • Save
    • Machine Reading By IdeaReader
    26
    References
    0
    Citations
    NaN
    KQI
    []