CFD Analysis of Aerodynamic Drag Reduction in Heavy Vehicles by Changing its Frontal Area: Techinical Note

Nowadays, fuel efficiency of heavy vehicles became an ultimate issue to the manufacturing and design engineers. The best approach to reduce the fuel consumption is to improve the aerodynamic performance of vehicle. This can be achieved by reducing the drag, because drag coefficient is directly proportional with the fuel consumption. Design engineers trying to improve the heavy vehicle’s performance by manipulating various parameters such as engine parameters, weigh, rolling resistance and aerodynamic drag. In this project, efforts were made to increase the aerodynamic performance by changing the frontal area of the container. Computational analysis was carried out at various velocities (50km/hr, 60km/hr, and 70km/hr) by changing the frontal area of the container in heavy vehicles. Different truck geometries were done using CATIA V5 and the simulations were done using ANSYS CFX software. Results were obtained and comparative studies were made. As a result of comparisons between various designs, the cowl of 2h dimension shows better results in reducing the drag when compared with the other designs.