Rich methane premixed laminar flames doped with light unsaturated hydrocarbons: I. Allene and propyne

The structure of three laminar premixed rich flames has been investigated: a pure methane flame and two methane flames doped by allene and propyne, respectively. The gases of the three flames contain 20.9% (molar) of methane and 33.4% of oxygen, corresponding to an equivalence ratio of 1.25 for the pure methane flame. In both doped flames, 2.49% of C3H4 was added, corresponding to a ratio C3H4/CH4 of 12% and an equivalence ratio of 1.55. The three flames have been stabilized on a burner at a pressure of 6.7 kPa using argon as dilutant, with a gas velocity at the burner of 36 cm/s at 333 K. The concentration profiles of stable species were measured by gas chromatography after sampling with a quartz microprobe. Quantified species included carbon monoxide and dioxide, methane, oxygen, hydrogen, ethane, ethylene, acetylene, propyne, allene, propene, propane, 1,2-butadiene, 1,3-butadiene, 1-butene, isobutene, 1-butyne, vinylacetylene, and benzene. The temperature was measured using a PtRh (6%)–PtRh (30%) thermocouple settled inside the enclosure and ranged from 700 K close to the burner up to 1850 K. In order to model these new results, some improvements have been made to a mechanism previously developed in our laboratory for the reactions of C3–C4 unsaturated hydrocarbons. The main reaction pathways of consumption of allene and propyne and of formation of C6 aromatic species have been derived from flow rate analyses.