High-temperature (350°C) glass phosphor layer for converted white light-emitting diodes
2012
The high-temperature operation up to 350°C of glass phosphor layer for using in converted white light-emitting diodes is
demonstrated. The results showed that the phosphor-converted white light-emitting diode (PC-WLEDs) maintained good
thermal stability in lumen, chromaticity, and transmittance characteristics at the high temperature up to 350°C. The
lumen degradation, chromaticity shift, and transmittance loss in glass based high-power PC-WLEDs under thermal aging
at 150, 250, 350, and 450°C are presented and compared with the silicone based high-power PC-WLEDs under thermal
aging at 150 and 250°C. The result clearly indicated that the glass based PC-WLEDs exhibited better thermal stability in
lumen degradation, chromaticity shift, and transmittance loss than the silicone based PC-WLEDs. The advantages of
glass doped encapsulation in high temperature PC-WLEDs could be arisen from the material property of glass transition
temperature 567°C higher than silicone of 150°C. These newly developed high-temperature glass based PC-WLEDs are
essentially critical to the application of LED modules in the area where the high-power, high-temperature, and absolute
reliability are required for use in the next-generation solid-state lighting.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
0
References
0
Citations
NaN
KQI