Bottom characterization by using airborne lidar bathymetry (ALB) waveform features obtained from bottom return residual analysis

Abstract Airborne Lidar Bathymetry (ALB) surveys are traditionally used for measuring depths in shallow nearshore and back-bay areas. In this paper, we present a novel ALB waveform processing procedure, namely bottom return residual analysis, for bottom characterization. Waveform features obtained from the bottom return residual analysis are used in a supervised classification approach, i.e. Support Vector Machine, to differentiate between: 1) sand and rock bottoms and subsequently, 2) fine and coarse sand bottoms. The classification procedure was tested on ALB survey data collected with an Optech SHOALS-1000T ALB system that covers a ~ 7 km 2 area within 1 km from shore in the western Gulf of Maine, USA. The bottom classification results, when compared to ground-truth measurements, indicate a 96% overall accuracy for sand and rock classification and 86% overall accuracy for fine and coarse sand classification. Results of ALB-based bottom classification are compared with interpretations of a multibeam echosounder acoustic backscatter mosaic collected from the survey area.