Elucidating the role of electrophoretic mobility for increasing yield in the electrophoretic deposition of nanomaterials

Abstract Hypothesis Catalysts, chemical, gas, and bio- sensing devices fabricated from porous nanoparticle films show better performance and sensitivity than their bulk material counterparts because of their high specific surface area. Electrophoretic deposition (EPD) technique is a cost-effective, fast, versatile, and easy to perform method to fabricate porous nanoparticle films. However, conventional EPD is currently limited by the fact that the deposition rate decreases with time, resulting in an eventual plateau in the deposit yield. Here, we sought to overcome this limitation by establishing and leveraging the critical role of the particle’s electrophoretic mobility in EPD kinetics. Experiments To identify the impact of electrophoretic mobility on EPD yield we used alumina nanoparticles suspended in ethanol as a model system. Changes in particle mobility were monitored via changes in the effective pH (pHe) of the suspension during EPD. We also developed a new suspension replenish EPD approach that allows us to maintain near-constant particle mobility and particle concentration with time thereby increasing yield. Findings We observed that in conventional EPD the particle mobility of the alumina nanoparticles decreased with time, resulting in a halting of deposition. Further, using the suspension replenish EPD, we observed a linear increase in the mass of the deposited film with time, overcoming the plateau limitation of conventional EPD.