Performance analysis of LYSO–SiPM detection module for X-ray communication during spacecraft reentry blackout
2021
Abstract In view of the demand for high-energy and high-bandwidth signal detection in X-ray communication (XCOM) during spacecraft reentry blackout, a detection module using fast-decay LYSO scintillator coupled with Silicon photomultiplier (SiPM) was proposed in this study. The theoretical model based on the Monte Carlo simulation and Personick’ theory was established and the detector prototype was built. Moreover, the signal to noise ratio (SNR) and bit error rate (BER) performance were investigated. Results present that the SNR of 19.8 dB, 29.9 dB and 35.5 dB could be reached for X-ray with the energy of 17 keV, 59.5 keV and 122 keV respectively. This energy response characteristic is much suitable for the X-ray signal detection during spacecraft reentry blackout. Additionally, the deviation of SNR corresponding to the BER between the theoretical and experimental results does not exceed 0.3 dB when the data rate is 100 kbps, which proves the validity of the theoretical model. Furthermore, the numerical analysis shows that the scheme demonstrates high SNR and low BER performance in high bandwidth and low signal receiving power, which explains the superiorities in X-ray signal detection of the design. This work provides the theoretical basis and design reference for the LYSO–SiPM X-ray signal detection module.
Keywords:
- Correction
- Source
- Cite
- Save
- Machine Reading By IdeaReader
25
References
1
Citations
NaN
KQI