Coarsening process and precipitation hardening in Fe2AlV-strengthened ferritic Fe76Al12V12 alloy

Abstract Strengthening through a homogeneous distribution of a nano-sized second phase is a concept that is proposed to reinforce solid-solution body centered-cubic iron for high-temperature application in fossil-energy power plants. It was shown that these microstructures can be obtained in the Fe-Al-V system with L2 1 -ordered Fe 2 AlV precipitates in a ferritic matrix. The effect of aging in the range 600–700 °C on the ferritic Fe 76 Al 12 V 12 alloy was investigated using Vickers micro-hardness test and transmission electron microscopy. The diffusion screening coarsening theory is used to analyze the ripening kinetics. When volume fraction and mobility of the components in the ternary alloy are considered, the interfacial energy between the matrix and the precipitate was determined as ( 18 ± 3 ) × 10 − 3 J / m 2 at 700 oC but increases strongly when the temperature decreases. A classic precipitation hardening behavior has been observed along the time for each aging treatment. At room temperature, the increment of flow stress has a peak of about 450 MPa for a precipitate radius of 10 nm. Quantitative agreement is found with strength values predicted from order strengthening theory, predicting that strength is controlled by a precipitate shearing mechanism for sizes around that of peak strengthening, and the Orowan dislocation bypass mechanism for larger sizes. The APB energy of Fe 2 AlV precipitate was estimated to be ( 27 ± 4 ) × 10 − 2 J / m 2 .