Natural Rail Surface Defect Inspection and Analysis Using 16-Channel Eddy Current System

Trains are used as the fastest mode of transportation for both people and cargo. The train moves along a special path called “rail”, where fatigue can be accumulated due to wheel-rail contact load as a result of continuous train operation. Consistent and regularly scheduled safety management is required since corrosion rate of the rails located on outside environment is very high. Researchers have actively investigated and developed rail defect inspection systems employing non-destructive techniques to address these problems. In particular, the eddy current inspection technique does not involve contact with the surface of the test specimen and offers the advantage of excellent rail defect detection sensitivity. Therefore, a 16 Channel array eddy current inspection device was developed to inspect the surface defects of the rail. An equation was derived to predict the correlation between the depth and phase of an artificial defect using the eddy current inspection device, and the derived equation was applied to the natural defect specimen.