Nanofinishing of FDM-fabricated components using ball end magnetorheological finishing process

ABSTRACTFused deposition modeling (FDM) is among the extensively used and the most economical additive manufacturing processes. Currently, the surface finish obtained for FDM additive manufactured parts are not at par with the current industrial application. To overcome the limitation of high surface roughness of 3D printed parts, a novel finishing technique has been proposed which includes primary and secondary finishing processes. While facing and lapping has been used as primary finishing technique, the secondary finishing involves the use of ball end magnetorheological finishing (BEMRF) process. BEMRF process is an unconventional finishing process which utilizes an advanced approach to impart finish on magnetic as well as non-magnetic materials that may be flat or freeform in shape. This article presents the experimental and analytical study to finish a polylactic acid (PLA) workpiece material manufactured by FDM process and finished using the BEMRF technique. The surface roughness of the FDM componen...