Evaluation of the flexural strength of carbon, quartz, and glass fiber-based posts

Objectives: This study was done to evaluate the flexural strength of carbon, quartz, and glass fiber posts by means of three-point bending test. Materials and Methods: Thirty pre-fabricated fiber posts were used and divided into three groups. Group I carbon fiber posts (C-Post), group II quartz fiber post (Aestheti Plus), group III glass fiber post (Para Post White) Ten posts ( N = 10) were used for each experimental group and were measured with digital caliper before test accomplishment. The fracture load of post specimens was measured, and flexural strength was obtained by the formula using S = 8FL/pd 3 . The values in Kgf/mm 2 were obtained and calculated to Mpa and submitted to ANOVA ( a = 0.01) and to the Tukey's test. Results: The mean values of flexural strength show that group II quartz fiber posts (666 MPa) are significantly higher than group I carbon fiber (614 MPa) and group III glass fiber (575 MPa). C onclusion: Hence, this study concluded that quartz fiber post showed significantly higher flexural strength values. Further scope of this study lies in the evaluation and evolution of a restorative materials used for post and core preparation, which have modulus of elasticity in harmony with that of dentin and near-natural esthetic appearance.