Stress distribution changes in growth plates of a trunk with adolescent idiopathic scoliosis following unilateral muscle paralysis: A hybrid musculoskeletal and finite element model.

Abstract This study aimed to investigate changes occurred in the stress distribution in the growth plates (GPs) of a trunk with adolescent idiopathic scoliosis (AIS) following unilateral muscle paralysis. We hypothesized that weakening the appropriately chosen muscles on the concave side can decelerate AIS deformity progression. Muscle forces and reaction loads were estimated by an optimization-driven musculoskeletal (MS) model of adolescents with a normal- and an AIS trunk, and then applied on the finite element model of GPs of L1 through L4. Different set patterns of 95% reduction in the strength of the concave-side longissimus thoracis pars thoracic (LGPT), multifidus lumborum (MFL), and LGPT + MFL muscles were performed in the MS models. Results of this study showed that weakening of the concave-side MFL and LGPT muscles rendered a 35% correction in the symptomatic axial rotation of the AIS spine, and a reduction of about 25% in the compressive von Mises stress on the concave side of GPs, respectively, which can decelerate the deformity progression. It was observed that unilateral muscle weakening caused a compensatory activation of the rest of muscles to retain the spine stability. The intradiscal pressures and ratio between the rotations toward either side of the scoliotic spine, found here, matched well with some recent in-vivo investigations. One of the applications of the stability-based MS model of AIS spine with unilaterally weakened muscles presented in this study is to optimize the performance of the currently used braces. To fortify the presented therapeutic approach, experiments should be done on scoliotic animals.