Cutting force-based real-time estimation of tool wear in face milling using a combination of signal processing techniques

Abstract In this paper, combinations of signal processing techniques for real-time estimation of tool wear in face milling using cutting force signals are presented. Three different strategies based on linear filtering, time-domain averaging and wavelet transformation techniques are adopted for extracting relevant features from the measured signals. Sensor fusion at feature level is used in search of an improved and robust tool wear model. Isotonic regression and exponential smoothing techniques are introduced to enforce monotonicity and smoothness of the extracted features. At the first stage, multiple linear regression models are developed for specific cutting conditions using the extracted features. The best features are identified on the basis of a statistical model selection criterion. At the second stage, the first-stage models are combined, in accordance with proven theory, into a single tool wear model, including the effect of cutting parameters. The three chosen strategies show improvements over those reported in the literature, in the case of training data as well as test data used for validation—for both laboratory and industrial experiments. A method for calculating the probabilistic worst-case prediction of tool wear is also developed for the final tool wear model.